Friday, September 30, 2011

Make Windows XP Boot-Up Faster - A Quick Registry Hack

Hey folks...Do you ever feel,your computer takes too much time to boot.Isn'i it annoying??

Let’s get straight to the point. This Windows XP registry tweak will make your system boot much faster. How much?
I can not say exactly how much faster, since it all depends on your computer specifications(processor, RAM, hard-drive and stuff like that…), but from my experience, this tweak decreased the time to boot-up for about 9-10 seconds.
Now you see how great this registry tweak is and it will get even better when you see how simple it is to apply. I will do my best to show you step-by-step and make it plain simple and of course with screenshots included.

How to make Windows XP start faster:

1. Click on “Start” on the taskbar.
2. Click “Run” located in the start menu.
3. Then in the “Run” panel, type: “regedit” without the quotation marks. (that will open up the Windows registry editor)
4. Then click on “HKEY_LOCAL_MACHINE” and expand it.
5. Then click on “SYSTEM” and expand it.
6. Then scroll down, and expand “CurrentControlSet”.
7. Under that, expand “Control”.
8. Then, under that one, locate and click on “ContentIndex”. (so when you click on it, it needs to be highlighted and it’s options need to show up in the right panel of Windows XP Registry Editor)
So to sum up, here’s where you need to navigate to:
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ContentIndex
Let’s continue… You have just 6 more steps until the finish line!
9. When you have clicked on “ContentIndex” and it is highlighted and you see the options and parameters on the right side of the panel… Among those, you need to scroll all the way to the bottom and find the Registry key named “StartupDelay”.
10. Double-click on it and a new window panel will pop-up.
11. The new window has a field to enter value (and a default value entered already). But before you change the value, you need to change the base from Hexadecimal to Decimal. Take a look at the screenshot below to see what I am talking about:
Now when you change it to Decimal, it displays a different value (480000 instead of 75300).
12. So now, all you need to do is change the value from “480000” to “40000” (forty thousand)
Many people ask me if they can change it to an even smaller value than 40000, but I would not recommend doing that. I tested it and it doesn’t work. I did not feel any difference in boot-up time when I change it to value less than 40000 (and no, you can’t put 0 either).
13. After you’ve completed all the steps above, click “OK” and close the Registry Editor.
And one just one little thing you need to do to finish all this registry tweaking…
14. Restart your computer.
Now you can notice big difference in time that your system takes to boot-up. Mine was faster for 10 seconds than usual. 

Wednesday, September 28, 2011

How to Hide Drive in Windows without software or registry

Hello friends, today i will share with you an absolutely new technique to hide any drive without using any software or even gpedit or even registry. In this tutorial i will explain how to hidedrive in windows xp using command prompt. Its really a cool trick and i really guarantee that you all will appreciate this hack. This not actually a hack but its a logical concept. Since my motive is to teach you so i will explain you in detail.

How Windows recognizes anything means any files or any drive on your System? a very simple question for all of you. Try to explore the answer and share your thoughts below in form of comments. Don't worry if you don't able to find i will share with you.

Let's get back to how to hide drive in Windows XP without any software or registry or group policy hack. If your system is accessed by users other than you and you really want to hide any of your drive then its the best method and more cool is that no software can even show that drive.

Steps to hide the drive:
1. Go to Start > Run > type "diskpart".
A DOS window will appear with following description.


2.  Then type "list volume"
Then you will see something like this:

3. Now suppose you want to hide drive D then type "select volume 2"
Then a message will appear in same window { Volume 2 is the selected volume}

4.  Now type "remove letter D"
Now a message will come { Diskpart Removed the Drive letter }
Diskpart will remove the letter D. In some cases it also ask for reboot. So you need to reboot in that case for this trick to work.
Now check your my computer, you will not find the D drive there. So its quite easy to hide you data with help of hiding the drive.
Windows XP is not having capability to identify the unknown volume. Your Data is now safe from unauthorized users.

Now if you want to access the Drive again. Repeat the first three steps as such and in the fourth step Instead of remove give "assign letter D". It will give the unknown volume a name you will be able to access that drive again.

I hope you all have like this tutorial.... If you have any queries ask me in form of comments..

Install Windows Xp in 10 minutes-A wonderful way

Hey Guys This Time I come Up With another Wonderful Hack That You Will Never Imagine But Its Truth and We have Done It. This Time I will explain How to Install Windows In Just 10 minutes??
As We all know that During Formatting a Computer After the File Copying is Completed then windows Require 39 Minutes Time...But What Extreme In It.... Yes We can Bypass this Time .... How TO DO IT??? So read On..
I have Included Snaps so that you can learn will help you all....

STEP1 : After the Copy Part is Over ... System is Rebooted as we all know In general Foramatting Procedure...
Now After Reboot The Below Image Will Appear....

STEP 2: Now As This Image APPEARS You Have to Press  "Shift + F10 "  . This Will Open The command Prompt...  Now type  taskmgr  in it. This will open the Task manager .

STEP 3 : After The task Manager Opens Goto Processes ... And Find "Setup.exe"  process and Right CLICK on It.... and set the Priority to Highest....

STEP 4: Now Just Watch the Set It will take around 9 minutes and 2 minutes for Tolerance(depends System to system)....

Thats the Overall Tutorial...Hope You all Have LIKED IT...

So When you Format your PC Next Time It will Really Save Your TIME i.e around 20 to 25 minutes...

Hope you like it.
Enjoy and don't forget to comment.

Tuesday, September 27, 2011

How To Cheat Rapidshare and other such Downloading Sites : 100 % working and tested Tricks

Hey all....
You must be pissed off with time limit on various downloading sites like 

rapidshare,filesonic,hotfile etc..etc.

What happen on those sites Whenever you want to download two or more than two files 

then a timer will start stating that"YOU CROSS YOUR DOWNLOADING LIMIT AND YOU 


Hell,No one likes to wait even not me.So what to do now???

Well,I'm here with some methods which make you bypass this time deadline.
Rapidshare has been an excellent tool for sharing large files. Recently users have discovered ways ofbypassing the download limits and skipping the waiting time. Here are a description of these methods.

RapidShare: NIC tricks and MAC cloning to bypass download limit
Rapidshare traces the users IP address to limit each user to a certain amount of downloading per day. To get around this, you need to show the rapidshare server a different IP address.

Here are some methods for doing this:

1. Short-Out the JavaScript:

1. Goto the page you want to download
2. Select FREE button
3. In the address bar put the following: javascript:alert(c=0)
4. Click OK
5. Click OK to the pop-up box
6. Enter the captcha
7. Download Your File

Or If not working go to step 2

2. Request a new IP address from your ISP server.

Here’s how to do it in windows:
1. Click Start
2. Click run
3. In the run box type cmd.exe and click OK
4. When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew

5. Erase your cookies in whatever browser you are using.
6. Try the rapidshare download again.

NOTE: Frequently you will be assigned a new IP address when this happens. Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work. To be honest, I do not know how to do this in linux/unix/etc. If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.

3. Use a proxy with SwitchProxy and Firefox:

1. Download and install Firefox if you have not already
2. Download and install SwitchProxy
3. Google for free proxies
4. When you hit your download limit, clean your cookies and change your proxy


4. Use an anonymous service:

Running your system through the tor network should in theory work; however, it is difficult to use and setup. Plus, you allow others to run their evil deeds through your system as well by using this system. Anonymizer 2005 is inexpensive, easy to use, but not free. Other pay services would likely work as well.
No need to buy any softwares You can get such softwares on my blog.. See the POST "DOWNLOAD UNLIMITED FROM RAPIDSHARE FOR FREE WITHOUT WAITING"

5. You can use a bookmarklet to stop your wait times:

1. Open IE
2. Right Click On This Link
3. Select Add to Favorites
4. Select Yes to the warning that the bookmark may be unsafe.
5. Name it “RapidShare No Wait”
6. Click on the Links folder (if you want to display it in your IE toolbar)
7. Click OK
8. You may need to close and reopen IE to see it
9. Goto rapidshare and click the bookmarklet when you are forced to wait.

Hope you like the article.
Enjoy and don't forget to comment.

Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Web Hosting Bluehost